In The Hoop Little House Key Fobs Set
This is an "In the hoop" design and is 50% off as marked. It is NOT included in our 6 for $12, 10 for $15 and 16 for $20 promotion.
Four adorable little house key fob designs for your stitching fun! Great for your house keys! These are so quick and easy to make and loads of fun!
Each file comes with 2 files: 1 for the 4x4 hoop to make one key fob. One for the 5x7 hoop which makes two key fobs.
Some supplies needed are:
-faux leather or marine vinyl. I got some for my samples on Amazon that I loved.
-KAM snaps for your snap tabs
-Key Fob Hardware
Instant download! You will receive a single zip file that will include all *available* sizes & formats: ART, DST, EXP, JEF, HUS, PCS, PES, SEW, VIP, VP3 & XXX. (Please note that PCS and SEW formats will only include 4x4 files when available for the design)
These are digital machine embroidery designs…NOT a finished product. You must own an embroidery machine & know how to unzip your files and transfer files to your machine.
If you have any questions, please visit our FAQ and TERMS OF USE pages where you may find your answer. If you still need assistance, please CONTACT US and our support staff will assist you.
We are unable to offer advice or support for your embroidery machine or software, so please direct those questions to your dealer or manufacturer. Thank you. Occasionally we link to products we use with our embroidery designs. As an Amazon Affiliate, we earn a small amount from qualifying purchases.
Where hoop sizes are mentioned, we are referring to standard hoop sizes:
4x4 (100mm x 100mm), 5x7 (130mm x 180mm), 6x10 (160mm x 260mm), 8x8 (200mm x 200mm), 7x12 (180mm x 300mm), 8x12 (200mm x 300mm), 9.5x14 (240mm x 360mm), 10.5x16 (272mmx460mm)
It is your responsibility to understand your hoop capabilities. Please note that "in the hoop" and "applique" designs can NOT be used with a repositionable / multi positional hoop.
NO REFUNDS per our policies.
Four adorable little house key fob designs for your stitching fun! Great for your house keys! These are so quick and easy to make and loads of fun!
Each file comes with 2 files: 1 for the 4x4 hoop to make one key fob. One for the 5x7 hoop which makes two key fobs.
Some supplies needed are:
-faux leather or marine vinyl. I got some for my samples on Amazon that I loved.
-KAM snaps for your snap tabs
-Key Fob Hardware
Instant download! You will receive a single zip file that will include all *available* sizes & formats: ART, DST, EXP, JEF, HUS, PCS, PES, SEW, VIP, VP3 & XXX. (Please note that PCS and SEW formats will only include 4x4 files when available for the design)
These are digital machine embroidery designs…NOT a finished product. You must own an embroidery machine & know how to unzip your files and transfer files to your machine.
If you have any questions, please visit our FAQ and TERMS OF USE pages where you may find your answer. If you still need assistance, please CONTACT US and our support staff will assist you.
We are unable to offer advice or support for your embroidery machine or software, so please direct those questions to your dealer or manufacturer. Thank you. Occasionally we link to products we use with our embroidery designs. As an Amazon Affiliate, we earn a small amount from qualifying purchases.
Where hoop sizes are mentioned, we are referring to standard hoop sizes:
4x4 (100mm x 100mm), 5x7 (130mm x 180mm), 6x10 (160mm x 260mm), 8x8 (200mm x 200mm), 7x12 (180mm x 300mm), 8x12 (200mm x 300mm), 9.5x14 (240mm x 360mm), 10.5x16 (272mmx460mm)
It is your responsibility to understand your hoop capabilities. Please note that "in the hoop" and "applique" designs can NOT be used with a repositionable / multi positional hoop.
NO REFUNDS per our policies.